Manuals / NETGEAR / Computer Equipment / Network Router

NETGEAR WNDR4500 user manual LAN Setup,  To change the LAN settings

Models: WNDR4500

1 130

Download 130 pages 47.91 Kb

Page 35

N900 Wireless Dual Band Gigabit Router WNDR4500

LAN Setup

The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host Configuration Protocol (DHCP) and Routing Information Protocol (RIP).

The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The router’s default LAN IP configuration is:

•LAN IP address. 192.168.1.1

•Subnet mask. 255.255.255.0

These addresses are part of the designated private address range for use in private networks and should be suitable for most applications. If your network has a requirement to use a different IP addressing scheme, you can make those changes in the LAN Setup screen.

To change the LAN settings:

Note: If you change the LAN IP address of the router while connected through the browser, you will be disconnected. You will have to open a new connection to the new IP address and log in again.

1.Select Advanced > Setup > LAN Setup to display the following screen:

2.Enter the settings that you want to customize. These settings are described in the following section, LAN Setup Screen Settings.

3.Click Apply to save your changes.

NETGEAR genie Advanced Home

35

Image 35

NETGEAR WNDR4500 user manual LAN Setup,  To change the LAN settings

Contents

October 2013 East Plumeria Drive San Jose, CA N900 Wireless Dual Band Gigabit Router WNDR4500 Support Contents USB Storage Advanced Settings Appendix a Supplemental Information Getting to know your router Hardware Setup Position Your Router Unpack Your Router Front Panel Hardware Features LED Label Back Panel Getting Started with Netgear Genie Connecting to the router Use Standard TCP/IP Properties for Dhcp Router Setup PreparationTypes of Logins and Access Wireless Devices and Security Settings Browse to http//routerlogin.net Netgear genie Setup To use Netgear genie to set up your router Upgrade Router Firmware Use Netgear genie after Installation Router Dashboard Basic Home Screen Manual Method Add Wireless Devices or Computers to Your NetworkWi-Fi Protected Setup WPS Method  To use WPS to join the wireless network Your Internet connection and network Netgear genie Basic Settings Does Your ISP Require a Login? Answer either yes or no Internet SetupInternet Setup Screen Fields Internet IP Address Attached Devices ReadySHARE USB Storage Parental Controls  To view or change basic wireless settings Basic Wireless Settings Region Selection Wireless Settings Screen Fields Change WPA Security Option and Passphrase Wireless Network GHz b/g/n and 5.0 GHz a/nSecurity Options Settings Guest Networks  To set up a guest network WPA Encryption Guest Network Wireless Security Options Netgear genie Advanced Home Specifying custom settings Setup Wizard Select either Push Button or PIN Number WPS WizardSelect Advanced WPS Wizard Setup Menu WAN Setup Change the MTU Size Default DMZ Server To set up a default DMZ server Common MTU Sizes  To change the MTU size Select Advanced Setup WAN Setup  To change the LAN settings LAN Setup Use Router as a Dhcp Server LAN Setup Screen SettingsLAN TCP/IP Setup Use the Router as a Dhcp Server  To reserve an IP address Address Reservation Set Up QoS for Internet Access Quality of Service QoS SetupEnable WMM QoS for Wireless Multimedia Applications  To create a QoS policy for applications and online games QoS for Applications and Online Gaming Click the Add Priority Rule button QoS for a Router LAN Port Click Add Priority Rule QoS for a MAC Address  To edit or delete a QoS policy Editing or Deleting an Existing QoS Policy USB Storage Accessing and configuring a USB storage File-Sharing Scenarios ReadySHARE AccessUSB Drive Requirements  To share files with your friends and family Sharing PhotosStoring Files in a Central Location for Printing Sharing Large Files over the Internet Basic Settings Add or Edit a Network Folder  To access your USB device USB Storage Advanced Settings Available Network Folders Safely Remove a USB Drive Specify Approved USB Devices Media Server Settings Select the Allow only approved devices check box Ftp//10.1.65.4 Access the Router’s USB Drive Remotely Using FTP To connect to the router’s USB drive using a web browser Connect to the USB Drive from a Remote Computer ReadySHARE Printer ReadySHARE Printer  To set up ReadySHARE Printer N900 Wireless Dual Band Gigabit Router WNDR4500 N900 Wireless Dual Band Gigabit Router WNDR4500 N900 Wireless Dual Band Gigabit Router WNDR4500 N900 Wireless Dual Band Gigabit Router WNDR4500 USB Control Center Utility USB Printer Control Center Configuration  To control a USB speaker Scan with a Multi-Function PrinterUSB Speaker Desktop Netgear genie Security Keeping unwanted content out of your network  To specify a trusted computer Keyword Blocking of Http Traffic To delete a keyword or domain  To block services Block Services Port Filtering N900 Wireless Dual Band Gigabit Router WNDR4500  To schedule blocking Schedule Blocking Security Event Email Notifications  To set up email notifications Managing your network Administration Upgrade the Router Firmware Hardware Version. The router model Internet Provider WAN SetupView Router Status Router Information System up time and poll interval statistics Statistics Button View connection status information Connection Status Button Wireless Settings 2.4 GHz and 5 GHz Guest Network 2.4 GHz and 5 GHz View Logs of Web Access or Attempted Web Access N900 Wireless Dual Band Gigabit Router WNDR4500  To restore configuration settings that you backed up Manage the Configuration FileBack Up Settings Restore Configuration Settings Erase Password Recovery Set Password Time Machine Set Up Time Machine To set up Time Machine  To access the drive Access the Connected USB Hard Drive Time Machine Before You Back up a Large Amount of Data N900 Wireless Dual Band Gigabit Router WNDR4500 Change the Partition Scheme Select Guid Partition Table or Master Boot Record MBR Advanced Settings Advanced Wireless Settings Wireless repeating scenario Wireless Repeating Function WDS Wireless Repeating Function  To set up the base station Set Up the Base Station  To configure the router as a repeater unit Set Up a Repeater Unit Port Forwarding and Triggering Remote Computer Access Basics Destination port number Port Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering  To set up port forwarding Set Up Port Forwarding to Local Servers Add a Custom Service  To edit or delete a port forwarding entry Click Edit Service or Delete ServiceEditing or Deleting a Port Forwarding Entry Application Example Making a Local Web Server Public Universal Plug and Play on Set Up Port Triggering 100 Dynamic DNS 102 Static Routes  To set up a static route Remote Management Universal Plug and Play USB Settings  To turn on Universal Plug and Play IPv6  To set up an IPv6 Internet connection type Traffic Meter Troubleshooting Sequence to Restart Your Network Wireless SettingsNetwork Settings Quick Tips Power/Test LED Stays Amber Troubleshooting with the LEDsPower/Test LED Is Off or Blinking Push N Connect WPS Button Blinks Amber Wireless LEDs Are OffLEDs Never Turn Off Internet or Ethernet Port LEDs Are Off Cannot Log In to the Router Cannot Access the Internet 115  To troubleshoot a PPPoE connection Troubleshooting PPPoETroubleshooting Internet Browsing Select Administration Router Status Changes Not Saved Wireless ConnectivityRestore the Factory Settings and Password Wireless Signal Strength  To ping the router from a running Windows PC Troubleshoot Your Network Using the Ping UtilityTest the LAN Path to Your Router Test the Path from Your Computer to a Remote Device Supplemental Information Factory Settings 121 WNDR4500 Router specifications Technical Specifications 123 Notification of Compliance Netgear Dual Band Wireless Industry Canada Interference Reduction Table 127 Index 128 129 130