HP TippingPoint Next Generation Firewall manual Boot, Clear, Manages software packages Syntax

3 Root Commands

The top level root command line mode displays the NGFW{} prompt. Commands at this level are used for managing and monitoring system operations for the various subsystems. From the root command mode, you can access the configuration mode, and the available commands that apply to the appliance as a whole. Enter help full or help COMMANDNAME at the command prompt to display a list of available commands or help on a specific command.

NGFW{}help

The default NGFW{} command prompt can be changed using the host name command in the interface mgmt context of the edit mode. For example:

NGFW{}edit

NGFW{running}interface mgmt

NGFW{running-mgmt}help host (displays valid entries for configuring management port host settings) NGFW{running-mgmt}host ? (displays valid entries for host command)

NGFW{running-mgmt}host name yourhostname

boot

Manages software packages.

Syntax

boot (list-imagerollback) Example

NGFW{}boot list-image

IndexVersion

------------------------------------------------------

0	1.0.0.3935
1	1.0.0.2923
2	1.0.0.3932
3	1.0.0.3917
Oldest Index is	2

Factory Reset Index is 3

clear

Clears system information.

Syntax

clear connection-table (blockstrusts)

clear high-availability state-sync (allfirewallipsrouting) clear ip bgp (A.B.C.DASNUMBERallexternal) [soft] [inout] clear ip bgp peer-group NAME [soft] [inout]

clear log-file (auditfwAlertfwBlockipsAlertipsBlockquarantinereputationAlertreputationBlock systemvisibilityvpn)

clear np engine filter clear np engine packet clear np engine parse

clear np engine reputation dns clear np engine reputation ip clear np engine rule

clear np reassembly ip clear np reassembly tcp clear np rule-stats

NGFW Command Line Interface Reference 13