HP TippingPoint Next Generation Firewall Running-ospfv3 Context Commands, NGFWrunning-ospfv3area

rip	Routing Information Protocol (RIP)
bgp	Border Gateway Protocol (BGP)
metric-type	OSPF exterior metric type for redistributed routes
(1-2)	Set OSPF exterior type metric
metric	Metric
(0-16777214)	Set metric for redistributed routes
route-map	Route map reference
ROUTE-MAP	Route map name

Example

NGFW{running-ospf}redistribute rip metric-type ?

Valid entry at this position is:

<1-2> Set OSPF exterior type metric

NGFW{running-ospf}redistribute rip metric-type 1 route-map name

NGFW{running-ospf}rfc1583-compatible

Enable RFC-1583 compatibility (Disabled by default).

Syntax

rfc1583-compatible

Example

NGFW{running-ospf}rfc1583-compatible

NGFW{running-ospf}router-id

OSPF router-id.

Syntax router-id A.B.C.D

A.B.C.D OSPF router ID in IP address format

Example

NGFW{running-ospf}router-id 198.51.100.150

running-ospfv3 Context Commands

NGFW{running}router ospfv3

NGFW{running-ospfv3}area

Configure an OSPFv3 area, area range, or virtual link.

Syntax

area (A.B.C.D(0-4294967295)) range X:X::X:X/M

area (A.B.C.D(0-4294967295)) (stubnssatsa)

area (A.B.C.D(0-4294967295)) virtual-link A.B.C.D

area (A.B.C.D(0-4294967295)) virtual-link A.B.C.D [hello-interval VALUE]

area (A.B.C.D(0-4294967295)) virtual-link A.B.C.D [hello-interval VALUE] [retransmit-interval VALUE]

area (A.B.C.D(0-4294967295)) virtual-link A.B.C.D [hello-interval VALUE] [retransmit-interval VALUE] [transmit-delay VALUE]

area (A.B.C.D(0-4294967295)) virtual-link A.B.C.D [hello-interval VALUE] [retransmit-interval VALUE] [transmit-delay VALUE] [dead-interval VALUE]

Example

NGFW{running-ospfv3}area 2 ?

NGFW Command Line Interface Reference 195