HP TippingPoint Next Generation Firewall manual IP configuration mode

interface bridgeX interface ethernetX interface greX interface l2tpX interface loopbackX interface mgmt interface pppoeX interface pptpX interface vlanX Example NGFW{running}interface bridge2 NGFW{running-bridge2}?

Valid entries at this position are:

arp/ndp	Enable or disable ARP and NDP on interface
autoconfv6	Enable or disable IPv6 autoconfiguration on interface
bind	Bind bridged network interface over ethernet/VLAN/agglink
delete	Delete file or configuration item
description	Enter description for the interface
help	Display help information
ip	Configure IP settings
ipaddress	Configure IP address
ipv6	Configure IPv6 settings
mtu	Configure interface MTU
prefix	Configure IPv6 prefix
ra-autoconf-level	Modify IPv6 Router Advertisement autoconfiguration level
ra-interval	Modify IPv6 Router Advertisement interval value
ra-interval-transmit	Modify IPv6 Router Advertisement interval transmit
ra-lifetime	Modify IPv6 Router Advertisement prefix lifetime
ra-mtu	Modify IPv6 Router Advertisement MTU value
ra-transmit-mode	Modify IPv6 Router Advertisement transmit mode
router-advert	Configure IPv6 Router Advertisement parameters
shutdown	Shutdown logical interface state
tcp4mss	Configure interface TCP MSS for IPv4
tcp6mss	Configure interface TCP MSS for IPv6

NGFW{running-bridge2}help

Related commands

running-agglinkX Context Commands running-bridgeX Context Commands running-ethernetX Context Commands running-greX Context Commands running-l2tpX Context Commands running-loopbackX Context Commands running-mgmt Context Commands running-pppoeX Context Commands running-pptpX Context Commands running-vlanX Context Commands

ip

IP configuration mode.

NGFW Command Line Interface Reference 71