HP TippingPoint Next Generation Firewall manual Show mfg-info, Show np engine

ADDRCONF(NETDEV_UP): ethernet7: link is not ready device ethernet7 entered promiscuous mode

Example

To tail the last 5 lines of the boot log file:

NGFW{}show log-file boot tail 5

bridge1: port 8(ethernet7) entering disabled state

bridge1: port 8(ethernet7) entering disabled state

ADDRCONF(NETDEV_UP): ethernet7: link is not ready device ethernet8 left promiscuous mode

device ethernet7 left promiscuous mode

show mfg-info

Shows manufacturing information.

Syntax

show mfg-info Example

NGFW{}show mfg-info
device34{}show mfg-info
ECO Version		: 40AA
Manufacturer S/N		: TBBC10021827
PCBA Assembly	Date	: 01/11/2012
Chassis Version		: 00
Mfg System Revision		: A905
HP Base Unit P/N		: 5066-2732
HP Base Unit Revision		: A1
Number of MACs		: 12
MAC Address		: 00:10:F3:2C:81:DE
Mgmt Port MAC	Address	: 00:10:F3:2C:81:DE
Ethernet1 MAC	Address	: 00:10:F3:2C:81:E2
HP Base Unit S/N		: PR2AFQY003
Internal Disk	Model	: 4GB SATA Flash Drive
Internal Disk	S/N	: 11001420994500582125
External Disk	Model	: 4GB SATA Flash Drive
External Disk	S/N	: 00224192122400702578
BIOS Version		: Z513-021
IPM Version		: 1.d (working)

show np engine

Shows network processor information.

Syntax

show np engine(filterpacketparsereputation(ipdns)rule)

filter - Show filter-level statistics packet - Show packet-layer statistics parse - Show packet parsing statistics

reputation - Show reputation statistics on either IP or DNS rule - Show rule statistics

Example

	NGFW{}show np engine packet
	Packet Statistics:
	Rx	packets OK	=	275263890
	Rx	packets dropped	=	0
38	Root Commands