HP TippingPoint Next Generation Firewall Running-dnat Context Commands, NGFWrunning-dnatdelete

Configure DHCPv4 lease

Syntax: lease <0-1073741824>

<0-1073741824> Lease value in seconds (0-1073741824)

NGFW{running-dhcp-server-myscope}option

Configure options.

Syntax

option (NAMENUMBER) text Value 1

option (NAMENUMBER) boolean Value 1 [Value 2] [Value 3] option (NAMENUMBER) integer8 Value 1 [Value 2] [Value 3] option (NAMENUMBER) hex8 Value 1 [Value 2] [Value 3] option (NAMENUMBER) integer32 Value 1 [Value 2] [Value 3] option (NAMENUMBER) hex32 Value 1 [Value 2] [Value 3] option (NAMENUMBER) ipaddress (Value 1) [Value 2] [Value 3]

Refer to https://tools.ietf.org/html/rfc2132#section-3 or https://en.wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol#DHCP_options for known option names and numbers.

Example

NGFW{running-dhcp-server-myscope}help option

option			Configure		options
Syntax: option			(NAME)	Values
Values as specified				in documents referenced above
Syntax: option			(NUMBER)		text Value 1
Value	1 can include			up to 256 characters of any type including spaces and tabs
Syntax:	option		(NUMBER)		boolean Value 1 [Value 2] [Value 3]
Value	1,2,3	must be		string true or false
Syntax:	option		(NUMBER)		integer8 Value 1 [Value 2] [Value 3]
Value	1,2,3	must be		in integer between 0 and 255
Syntax:	option		(NUMBER)		hex8 Value 1 [Value 2] [Value 3]
Value	1,2,3	must be		in hex integer between 0 and ff and entered as (0x0-0xff)
Syntax:	option		(NUMBER)		integer32 Value 1 [Value 2] [Value 3]
Value	1,2,3	must be		in integer between 0 and 16777215
Syntax:	option		(NUMBER)		hex32 Value 1 [Value 2] [Value 3]
Value	1,2,3	must be		in hex integer between 0 and ffffff and entered as
(0x0-0xffffff)
Syntax: option			(NUMBER)		ipaddress (Value 1) [Value 2] [Value 3]
Value	1,2,3	can be a domain name of up to 255 characters or an IP address

NGFW{running-dhcp-server-myscope}subnet

Configure subnet.

Syntax

subnet A.B.C.D/M Example

NGFW{running-dhcp-server-myscope}subnet ?

Valid entry at this position is:

A.B.C.D/M IPv4 address and mask length

running-dnat Context Commands

NGFW{running}dst-nat

NGFW{running-dnat}delete

Delete destination NAT rule(s).

NGFW Command Line Interface Reference 131