HP TippingPoint Next Generation Firewall Show ip rip, Show ip route, Shows the RIP routes Syntax

Example

NGFW{}show ip pim-sm interface
Address	Interface	Mode	Neighbor	Hello	DR	DR Address
			Count	Intvl	Pri
182.168.1.10	ethernet5	sparse	1	30	1	182.168.1.20

Example

ngfw{}show ip pim-sm neighbor

Interface Address

ethernet5 182.168.1.20

ngfw{}show ip pim-sm bsr-router PIMv2 Bootstrap information

This system is the Bootstrap Router (BSR)

BSR address:	182.168.1.10
Uptime:	00:00:26, BSR Priority: 10, Hash mask length: 30
Next bootstrap message in		00:00:34

ngfw{}show ip pim-sm rp The PIM RP Set

Group: 239.255.255.2/32

RP: 182.168.1.10

Uptime: 00:00:51, Expires: 00:01:39, Priority: 10

show ip rip

Shows the RIP routes.

Syntax

show ip rip Example NGFW{}show ip rip

RIP Router Default Instance

Routing Protocol is "rip"

Sending updates every 30 seconds with +/-50%, next due in 29 seconds Timeout after 180 seconds, garbage collect after 120 seconds

Mesage load balancing using 1 time slots

Default redistribution metric is 1

Redistributing:

Default version control: send version 2, receive any version

Interface	Send	Recv	Pri	RIPv1BorderGW	RIPv1IngrSumy Key-chain
ethernet1	2	1 2	7	Enable	Enable
Split horizon
No authentication
Routing for Networks:
ethernet1
Routing Information Sources:
Gateway	BadPackets BadRoutes Distance Last Update
Distance: (default	is 120)

show ip route

Syntax

show ip route (bgpconnecteddebugmgmtospfripsmrstatic)

NGFW Command Line Interface Reference 29