HP TippingPoint Next Generation Firewall NGFWrunning-ethernet1mtu, NGFWrunning-ethernet1prefix

ipv6	Configure	IPv6 settings
ripng	Configure	RIPng over the interface
split-horizon	Enable split-horizon
poison-reverse	Enable poison-reverse

NGFW{running-ethernet1}mtu

Configure interface MTU.

Syntax

mtu (default(68-9216))

Example

NGFW{running-ethernet1}mtu 1500

NGFW{running-ethernet1}physical-media

Apply physical-media settings. Auto-negotiation is the default or specify a supported port speed and mode.

Syntax

physical-media (auto-neg10half10full100half100full1000full)

Example

NGFW{running-ethernet1}physical-media 1000full

NGFW{running-ethernet1}physical-media auto-neg

NGFW{running-ethernet1}prefix

Configure IPv6 prefix.

Syntax

prefix X:X::X:X/M [valid-lifetime SECONDS] [preferred-lifetime SECONDS]

X:X::X:X/M	IPv6 prefix
valid-lifetime	Configure valid lifetime
(1-4294967295)	Valid lifetime in seconds (default is 2592000)
preferred-lifetime	Configure preferred lifetime
(1-4294967295)	Preferred lifetime in seconds
	(default is 604800 - cannot exceed valid lifetime)

Example

NGFW{running-ethernet1}prefix 100:0:0:0:0:0:0:0/64 valid-lifetime 2592000 preferred-lifetime 604800

NGFW{running-ethernet1}ra-autoconf-level

Modify IPv6 Router Advertisement autoconfiguration level (DHCP).

Syntax ra-autoconf-level AUTOCONF

	Possible values for AUTOCONF are:
	none	No parameter is autoconfigured
	address	Address is autoconfigured
	other	Some other parameters are autoconfigured
	full	Most parameters are autoconfigured
140	Edit Running Configuration Commands