HP TippingPoint Next Generation Firewall manual Rotate, Sets log rotation parameters Syntax

log-test	(allauditvpnquarantinelogID LOGID) [critical [MESSAGE]]
log-test	(allauditvpnquarantinelogID LOGID) [error [MESSAGE]]
log-test	(allauditvpnquarantinelogID LOGID) [warning [MESSAGE]]
log-test	(allauditvpnquarantinelogID LOGID) [notice [MESSAGE]]
log-test	(allauditvpnquarantinelogID LOGID) [info [MESSAGE]]
log-test	(allauditvpnquarantinelogID LOGID) [debug [MESSAGE]]
log-test (allauditvpnquarantinelogID LOGID) [msg MESSAGE]
Valid entries:
all		All log systems
audit		Audit system
vpn		VPN (IPsec) system
quarantine		Quarantine system
logID		LogID system
LOGID		Log-session ID to test
SEVERITY		Set Severity level for log message (default: INFO)
Possible values for SEVERITY are:
emergency		EMERG level
alert		ALERT level
critical		CRIT level
error		ERR level
warning		WARNING level
notice		NOTICE level
info		INFO level (default)
debug		DEBUG level
msg		Override default message
MESSAGE		Message to send to logging system

Example

NGFW{log-configure}log-test logID 1 msg "my test message for logging"

NGFW{log-configure}log-test all

rotate

Sets log rotation parameters.

Syntax

rotate (setdelete) defaultCheckRecords (100-65535) rotate (setdelete) defaultFiles (2-20)

rotate (setdelete) maxFileSize (10-500MB) rotate (setdelete) sleepSeconds (1-65535)

rotate (setdelete) audit [Files (2-20)] [Records (100-65535)] rotate (setdelete) fwAlert [Files (2-20)] [Records (100-65535)] rotate (setdelete) fwBlock [Files (2-20)] [Records (100-65535)] rotate (setdelete) ipsAlert [Files (2-20)] [Records (100-65535)] rotate (setdelete) ipsBlock [Files (2-20)] [Records (100-65535)] rotate (setdelete) quarantine [Files (2-20)] [Records (100-65535)] rotate (setdelete) reputationAlert [Files (2-20)] [Records (100-65535)] rotate (setdelete) reputationBlock [Files (2-20)] [Records (100-65535)] rotate (setdelete) system [Files (2-20)] [Records (100-65535)]

rotate (setdelete) visibility [Files (2-20)] [Records (100-65535)] rotate (setdelete) vpn [Files (2-20)] [Records (100-65535)]

sleepSeconds	Logrotation sleep	time between checks
SLEEPSEC	Number of seconds	logrotation	waits between checks
defaultFiles	Default number of	logrotation	files
NUMFILES	Number of logrotation files (2 - 20)
defaultCheckRecords	Default number of	records between log daemon size checks
NUMRECORDS	Number of records	between log	daemon size checks (100 - 65535)
		NGFW Command Line Interface Reference		55