HP TippingPoint Next Generation Firewall manual Interface, Feature

delete failover-group name enabledisable

failover-group base-mac X:X:X:X:X:X failover-group name NAME

help [fullCOMMAND]

state-sync (global [enabledisable])(FEATURE [enabledisable(log-level SEVERITY)])

NGFW{running-high-availability}?

Valid entries at this position are:

delete	Delete file or configuration item
disable	Disable high-availability
enable	Enable high-availability
failover-group	Failover Group
help	Display help information
state-sync	State synchronization

NGFW{running-high-availability}help state-sync

Enable or disable high-availability (enabledisable)

Syntax: state-sync (global [enabledisable])(FEATURE [enabledisable(log-level

	SEVERITY)])
state-sync	State synchronization
global	Turn state synchronization on or off
enable	Enable state synchronization
disable	Disable state synchronization
FEATURE	Specify a state synchronization table
Possible values for FEATURE are:
firewall	Firewall state synchronization table
ips	IPS state synchronization table
routing	Routing state synchronization table
log-level	Specify logging level
SEVERITY	Log service severity
Possible values for SEVERITY are:
emergency	Panic condition messages
alert	Immediate problem condition messages
critical	Critical condition messages
error	Error messages
warning	Warning messages
notice	Special condition messages
info	Informational messages
debug	Debug messages
none	Turn off messages

NGFW{running-high-availability}state-sync ?

Valid entries at this position are:

firewall	Firewall state synchronization table
ips	IPS state synchronization table
routing	Routing state synchronization	table
global	Turn state synchronization on	or off

Related commands

running-high-availability Context Commands

interface

Enters interface context mode. The X represents a number to be entered, such as bridge2.

Syntax

#Enter context interface agglinkX

70 Edit Running Configuration Commands