HP TippingPoint Next Generation Firewall manual NGFWrunning-pppoe0ra-transmit-mode

Syntax

ra-mtu (none(68-9216))

none	Not	configured
MTU	MTU	value advertised (0 if none)

Example

NGFW{running-pppoe0}ra-mtu 1500

NGFW{running-pppoe0}ra-transmit-mode

Modify IPv6 Router Advertisement transmit mode.

Syntax

ra-transmit-mode MODE

Possible values for MODE are:

always	Router Advert message is				always sent
never	Router	Advert	message	is	never sent
smart	Router	Advert	message	is	sent if a prefix is defined

Example

NGFW{running-pppoe0}ra-transmit-mode smart

NGFW{running-pppoe0}service

Configure PPPoE service name.

Syntax

service (noneNAME)

Example

NGFW{running-pppoe0}service myPPPoEservice

NGFW{running-pppoe0}service none

NGFW{running-pppoe0}shutdown

Shutdown logical interface state.

Syntax

shutdown

Example

NGFW{running-pppoe0}shutdown

NGFW{running-pppoe0}tcp4mss

Configure interface TCP MSS for IPv4.

Syntax

tcp4mss (disableautomatic(4-65535))

Valid entries:

disable	Disable	service
automatic	Automatically select TCP MSS based on interface MTU
VALUE	TCP MSS	value for IPv4

NGFW Command Line Interface Reference 207