Operating Instructions, Control Board, Turn, CHnL

OPERATING INSTRUCTIONS

On the control panel you can set the DMX address, reset the fixture and change fixture personality trait.

[MENU] Toggles menu functions.

[SELECT] Changes menu function status and is used to set DMX address.

FUNCTION	OPTIONS			NOTES
Addr	000~512	DMX channel addressing
LP.ti	001	Used lamp time
		Pressing •• simultaneously zeroes lamp counter.

		Off: Normal
Shut	Off/On	On: Shutter closes during the changing of color, gobos
			or prism. Shutter will open after color, gobo or
			prism is in position.
CoLo	Off/On	Off: Color wheel gradually advances to the next color
			allowing the user to stop between colors.
		On: Color wheel will jump to the next color.
Focu	Off/On	Off: Normal		On: Focus adjustment
r.PAn	Off/On	Off: Left to right head movement (Pan Normal)
		On: Right to left head movement (Pan Inverted)

r.tilt	Off/On	Off: Down to up head movement (Tilt Normal)
		On: Up to Down head movement (Tilt Inverted)

16.br	Off/On	Off:	8 bit control mode	On: 16 bit control mode
deMo	Off/On	Off: Normal		On: Self-demo
SoFt	Off/On	Off: Quick paced function demonstration
		On: Slow paced function demonstration
		Note: Only works with deMo = On
dP.SE	Off/on	Off: Display off, press any key to turn on display
		On: Display On

rSEt	Off/On	Off: Normal
		On: Reset all motors at once

dF.SE	Off/On	Off: Normal
		On: Resets all wheels to factory defaults
			defaults to “Off” position
LAMP	Off/On	Off: Lamp Off		On: Lamp On
turn	Off/On	Off: Normal		On: Reverse display
CHnL	Off/On	Off: Assign Pan & Tilt’s DMX address to channel 11-14
		On: Assign Pan & Tilt’s DMX address to channel 1-4

Fi.ti	001	Fixture use timer. Press ▼▲ simultaneously for 3 seconds
		to zero the timer. Unit: hour

LEG-6000 User Manual

Revision: 2007-03-06/09:06