Troubleshooting
Problem |
| Possible Causes |
| Likely Solutions |
Battery Charger will | 1. | AC/DC Adapter Input Cord not | 1. | Check that Cord is plugged in. |
not start. |
| connected to 120 volt, grounded, |
|
|
|
| electrical outlet. |
|
|
| 2. | No power at outlet. | 2. | Check power at outlet. If outlet is |
|
|
|
| unpowered, unplug Battery Charger |
|
|
|
| and check circuit breaker. If breaker |
|
|
|
| is tripped, make sure circuit is right |
|
|
|
| capacity for Charger and circuit has no |
|
|
|
| other loads. |
| 3. | Battery is cold or has not been | 3. | Press Reset Button (see paragraph 8 on |
|
| used for an extended period. |
| page 8.) |
| 4. | Disconnected or poorly | 4. | |
|
| connected. |
|
|
|
|
|
|
|
Green and red | 1. | Battery is too cool or hasn’t been | 1. | Press Reset Button as discussed in step |
L.E.D.’s illuminate |
| used for a lengthy period of time. |
| #7 on pages 8 and 9 of this manual. |
simultaneously. | 2. | Battery is old or defective. | 2. | Press Reset Button as discussed in step |
|
|
|
| #7 on pages 8 and 9 of this manual. If |
|
|
|
| necessary, replace battery. |
|
|
|
|
|
Green and red | 1. | Improper or loose connection(s). | 1. | Make sure all connections are properly |
L.E.D.’s not |
|
|
| and securely connected. |
illuminating. |
|
|
|
|
Charger becomes | 1. | This is normal operation. | 1. | No action needs to be taken. |
warm or hot during |
|
|
|
|
charging. |
|
|
|
|
|
|
|
|
|
Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.
SKU 66718 | For technical questions, please call | Page 12 |
