Manuals / Chief Manufacturing / TV and Video / TV Mount

Chief Manufacturing LVS1U / LVSXU manual Installing Interface Brackets, Adding Displays to Mounts

Models: LVS1U / LVSXU

1 20
Download 20 pages 16.98 Kb
Page 11
Image 11

Installation Instructions

LVS1U / LVSXU

INSTALLING INTERFACE BRACKETS

1.Place displays face down on a soft, non-abrasive surface.

CAUTION: Using screws of improper diameter may damage your display! Proper screws will easily thread into display mounting holes.

2.Select screw diameter by examining hardware (A-C and F-H) (6mm or 8mm) and comparing with mounting holes on display. (See Figure 10)

3.Select spacers:

•Spacers are NOT required if mounting holes are not recessed and interface brackets (X) can lay flat against display.

•Spacers (E) ARE required if mounting holes are recessed, or if protrusions prevent interface brackets

(X) from laying flat.

CAUTION: Using screws of improper length may damage your display! Proper screws will have adequate thread engagement without contacting bottom of display mounting holes.

4.Select screw length: (See Figure 10)

•By hand, insert SHORTEST length screw of selected diameter (A or F) through 3/16" washer (D, if using screw A), bracket (X), selected spacer (E, if required), into display mounting hole. Do NOT thread screw into hole at this time.

•Proper screw length requires base of screw head to protrude above flat washer (if flat washer is used) a distance equal to or greater than the screw diameter. If screw length is inadequate, select longer screw. Select shortest screw which will protrude the required distance.

6

(A-C or F-H) x 4

 

 

(D) x 4

 

5

Match diamond

 

 

 

 

with center of

 

 

 

display

(X)

 

 

 

 

 

Bracket kickstand

 

 

may be raised to

 

 

allow hardware

 

(E) x 4, if

attachment

 

required

 

 

Figure 10

5.Make sure diamond on interface brackets is even with center of display. (See Figure 10)

6.Use selected screws (A-C or F-H), washers (D, if using screws A, B or C) and spacers (E), if necessary, to connect interface brackets (X) to back of display. (See Figure 10)

ADDING DISPLAYS TO MOUNTS

1.Raise display with attached interface brackets and hook top of brackets into top of mount. (See Figure 11)

2.Slowly bring bottom of display in towards mount until it clicks into place.

3.Repeat Steps 1 and 2 for remaining mounts in that row.

(LVS1U shown

as example)

Interface

bracket

hooked over

mount

1

1

4

5

4

(Display not shown)

Figure 11

4.The displays can be easily removed by pulling both interface bracket cords down. (See Figure 11)

5.Pull the bottom of the display out.

6.Lift up display to lift hooks off the mount.

11

Page 10 Page 12
Page 11
Image 11
Chief Manufacturing LVS1U / LVSXU manual Installing Interface Brackets, Adding Displays to Mounts
Page 10 Page 12

LVS1U / LVSXU specifications

The Chief Manufacturing LVS1U and LVSXU are state-of-the-art mounting solutions designed for the seamless integration of large displays in various environments, from corporate offices to educational settings and retail spaces. These models are particularly tailored for flat panel displays, providing enhanced functionality, flexibility, and reliability that meet the needs of modern technology.

One of the standout features of the LVS1U and LVSXU is their ability to support a wide range of display sizes, typically accommodating screens from 32 inches up to 75 inches. This versatility makes them suitable for a variety of applications, including video conferencing, digital signage, and collaborative workspaces. The mounting solutions are engineered to provide a secure hold, ensuring that the display remains stable even in high-traffic areas.

These models incorporate advanced technologies that enhance the user experience. For example, the LVS1U features a convenient tilting mechanism that allows for easy adjustments to the display angle. This feature is particularly beneficial in environments where glare from overhead lighting can affect visibility. The LVSXU variant takes it a step further by offering additional pivot capabilities, which provide even more flexibility in positioning the screen for optimal viewing.

Durability and ease of installation are key characteristics of the LVS1U and LVSXU. Made from high-quality materials, these mountings are designed to withstand the rigors of everyday use. The installation process is straightforward, thanks to integrated cable management systems and adjustable mounting brackets that simplify setup while maintaining a clean appearance. These mountings can be either wall-mounted or placed on a mobile cart, offering further versatility based on the specific layout and spatial requirements of the environment.

Another significant aspect is their compatibility with various VESA patterns, making the LVS1U and LVSXU suitable for a broad spectrum of display models. This adaptability ensures that users can easily upgrade their displays without the need for additional mounting hardware.

In summary, the Chief Manufacturing LVS1U and LVSXU are exceptional solutions for mounting large displays, combining innovative features, advanced technologies, and robust design. Their flexibility, durability, and ease of use make them ideal for modern commercial and educational settings, leading to improved engagement and enhanced viewing experiences.