Part Names and Functions
Rear Terminal
| !0 |
q | ] |
w | o |
e | [ |
r | i |
t | u |
| y |
qCOMPUTER INPUT TERMINAL (DIGITAL) Connect the computer output digital signal to this terminal. The HDTV (HDCP compatible) signal can also be connected
wCOMPUTER INPUT TERMINAL (ANALOG) Connect the computer (or RGB scart) output signal to this terminal
e5 BNC INPUT JACKS
Connect the component or composite video output signal from video equipment to VIDEO/Y, Pb/Cb, and Pr/Cr jacks or connect the computer output signal (5 BNC Type [Green, Blue, Red, Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V jacks (pp.20– 21).
rVIDEO INPUT JACK
Connect the component or the composite video output signal from video equipment to this jack (p.21).
tR/C JACK
When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied).
yUSB CONNECTOR (Series B)
Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of your computer to this connector with the supplied USB cable (p.20).
uCONTROL PORT CONNECTOR
When controlling the projector from a computer, connect the computer to this connector with a control cable (p.20).
i
Connect the
oMONITOR OUT TERMINAL
This terminal can be used to output the incoming analog RGB signal from INPUT
!0Infrared Remote Receiver (Back)
The infrared remote receiver is also located in the front (pp.10, 15).
]Kensington Security Slot
This slot is for a Kensington lock used to deter theft of the projector.
*Kensington is a registered trademark of ACCO Brands Corporation.
[RESET button
A
11
