65

WARNING:

High voltages are used to operate this projector. Do not attempt to open the cabinet.

If problems still persist after following all operating instructions, contact the dealer where you purchased the projector
or the ser vice center. Specify the model number and explain about the problem. We will advise you how to obtain
service.
This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety
standards against risk of fire, casualty, and electrical hazards.
The CE Mark is a Directive conformity mark of the European Community (EC).
Remote control does
not work.
● Check the batteries.
● Check if the ALL-OFF switch on the remote control is set to “ON.”
● Check if the RC sensor is set properly. (See page 51)
● Make sure no obstruction is between the projector and the remote control.
● Make sure you are not too far from the projector when using the remote control.
Maximum operating range is 16.4’ (5 m).
● Make sure that the remote control code conforms to the projector’s code.
(See page 51.)
● Unlock the Key lock function for the remote control. (See page 53).
● Wireless remote control does not work when the remote control cable is connected to
the projector. (See page 15).
Problem: Try These Solutions
Wireless mouse
function does not
work.
● Check the cable connection between the projector and your computer.
● Check the mouse setting on your computer.
● Turn on the projector before you turn on the computer.
Unable to unlock the
Logo PIN code lock,
Security key lock or
Security PIN code
lock.
● Contact the service station.
appears on the
screen
● Your operation is invalid. Operate correctly.
Appendix