Christie Digital Systems LW41 setup guide Displaying the picture

Use the FOCUS ring to focus the picture.

Turn the VERTICAL adjuster fully counter clockwise. Then turn it clockwise and adjust the vertical lens position upward.

Displaying the picture

1. Activate your signal source. Turn the signal source on, and make it send the signal to the projector.

2. Use the VOLUME + / VOLUME - buttons to adjust the volume.

To have the projector silent, press the MUTE button on the remote control.

3. Press the INPUT button on the projector. Each time you press the button, the projector switches its input port in turn. You can also use the remote control to select an input signal. Press the VIDEO button for selecting an input signal from the HDMI, COMPONENT (Y, Cb/Pb, Cr/Pr), S-VIDEOor VIDEO port, or the COMPUTER button for selecting an input signal from the COMPUTER IN1, COMPUTER IN2, LAN, USB TYPE A or USB TYPE B port.

4. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn.

5. Use the ZOOM ring to adjust the screen size.

6.

7.

8. Turn the LOCK counter clockwise to loosen the lock of the HORIZONTAL adjuster.

9. Turn the HORIZONTAL adjuster clockwise or counter clockwise to adjust the horizontal lens position.

10.Turn the LOCK fully clockwise to tighten it and lock the horizontal lens position.

(continued on next page)

VIDEO	COMPUTER MY SOURCE/
	DOC.CAMERA
ASPECT	AUTO SEARCH	BLANK
MAGNIFY	FREEZE PAGE	VOLUME	VOLUME+ button
ON	UP
OFF	DOWN		VOLUME- button
KEYSTONE	MY BUTTON	MUTE
			MUTE button
POSITION		MENU
	ENTER
ESC		RESET

INPUT button

VIDEO button

VIDEO COMPUTER MY SOURCE/

DOC.CAMERA

ASPECT	AUTO SEARCH BLANK		COMPUTER button
MAGNIFY	FREEZE PAGE	VOLUME
ON	UP		ASPECT button
OFF	DOWN
KEYSTONE	MY BUTTON	MUTE
	
POSITION		MENU
	ENTER
ESC		RESET
			FOCUS ring
			ZOOM ring
			LOCK
			(horizontal lens
			position lock)
			HORIZONTAL
			adjuster
			VERTICAL
			adjuster

10

LX41/LW41 Setup Guide020-000510-01 Rev. 1 (06-2012)