Christie Digital Systems LW41 setup guide Connecting power supply, Turning on the power

Connecting power supply

1. Put the connector of the power cord into the AC IN (AC inlet) of the projector.

2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange.

AC IN

Power cord

Please remember that when the DIRECT POWER ON

function activated, the connection of the power supply make the projector turn on.

WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fi re and/or electrical shock.

•Do not touch the power cord with a wet hand.

•Only use the power cord that came with the projector. If it is damaged, consult your dealer to get a new one. Never modify the power cord.

•Only plug the power cord into an outlet whose voltage is matched to the power cord. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation.

•Do not distribute the power supply to multiple devices. Doing so may overload the outlet and connectors, loosen the connection, or result in fi re, electric shock or other accidents.

NOTICE ►This product is also designed for IT power systems with a phase- to-phase voltage of 220 to 240 V.

Turning on the power

1. Make sure that the power cord is fi rmly and correctly connected to the projector and the outlet.

2. Make sure that the POWER indicator is steady orange. Then remove the lens cover.

3. Press the STANDBY/ON button on the projector or the remote control.

The projection lamp will light up and the POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light in steady green.

STANDBY/ON button

POWER indicator

WARNING ►A strong light is emitted when the projector’s power is on. Do not look into the lens of the projector or look inside of the projector through any of the projector’s openings.

NOTE • Please power on the projector prior to the connected devices.

•The projector has the DIRECT POWER ON function, which can make the projector automatically turn on. For more information, please see User Manual - Operating Guide.

8

LX41/LW41 Setup Guide020-000510-01 Rev. 1 (06-2012)