Samsung DVD-VR325/XEH, DVD-VR325/EUR manual Connecting the Component Video Cable, Progressive Scan

Connecting the Component Video Cable

You will enjoy high quality accurate colour reproduction images. Component video seperates the picture element into black and white(Y), blue(PB), red(PR) signals to present most clear and clean images.

1	Connect Component video cables between the
	COMPONENT VIDEO OUT		jacks on the rear of
	the DVD Recorder & VCR and COMPONENT
	VIDEO IN	jacks on the rear of the TV.
2	Connect audio cables between the audio output
	jacks on the rear of the DVD Recorder & VCR and
	AUDIO IN	jacks on the rear of the TV.

•Take care to respect the colour coding of the up and down channels.

•Press the input selector on your TV remote control until the Component signal from the DVD Recorder & VCR appears on your TV screen.

COMPONENT INPUT

❚Progressive Scan

Your TV must support progressive scan input to allow to watch progressive scan component video out.

•Press the P.SCAN button on the front panel while unit in stop mode, Video resolution will switch between 576i and 576p.

•Make sure that the colour coded connections match. That is, the Y, PB and PR component output jacks of your DVD Recorder & VCR should be connected to the exact corresponding component input jacks on your TV. Otherwise, red or blue images will be displayed on the TV screen.

•Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of progressive scan picture problems, it is recommended that you switch the connection to the standard definition output.

If there are questions regarding your Samsung TV set’s compatibility with this DVD Recorder & VCR, please contact our customer service centre.

What is “Progressive Scan”?

Progressive scan has twice as many scanning

Note	lines as the interlace output method has.
	Progressive scanning method can provide better
	and clearer picture quality.
	Depending on your TV, the method of connec-
	tion may differ from the illustration above.
	See your TV User’s Manual to find out if your TV
	supports Progressive Scan. If Progressive Scan
	is supported, follow the TV User’s instructions
	regarding Progressive Scan settings in the TV’s
	menu system.
	You must connect the DVD Recorder & VCR to
	the component(s) before using the Progressive
	Scan feature.
	Do not press the P.SCAN		button if you are using
	a TV that does not support Progressive mode.
	Nothing will be displayed on the screen if
	pressed.
	To release the Progressive mode, press the
	P.SCAN	button on the front panel once or twice
	times.
	The screen will recover after the PSO			LED on
	the front panel display turns off.
	The Component jacks will not output video
	resolutions above 576p.
	To view 720p and 1080i, connect the DVD
	Recorder & VCR to your TV with the supplied
	HDMI cable.
	With HDMI connected, press the P.SCAN			button

to alternate between all available resolutions. (See pages 32~33)

Connections

English - 19