Samsung DVD-VR325/XEH, DVD-VR325/EUR manual Making a One Touch, Recording OTR, To stop recording

Making a One Touch	Making a Timer
Recording (OTR)	Recording

One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 9 hours by

	pressing the REC		button.
1		Press the PROG/TRK		( / ) buttons or number
		buttons to select the station to record.
		If you want to record through a connected external
		component, press the INPUT SEL.			button to
		select an appropriate external input (AV1, AV2,
		AUX or DV).
2		Press the REC	button.

3 While in Record mode, press the REC button again to activate One-Touch Recording (OTR).

•Record length 0:30 appears on the On-Screen Display and the DVD Recorder & VCR will record for exactly 30 minutes.

4	Continue pressing REC button to add recording
	time in 30 minute increments up to 9 hours.

•The DVD Recorder & VCR stops recording automatically when the time has elapsed.

❚To stop recording

Press the STOP ( ) button.

The message “Press STOP button once more to cancel Timer Record” is displayed.

Press the STOP ( ) button again.

The message “Updating the Information of disc. Please wait for a moment” is displayed.

■ The timer counter decreases by the minute from 9:00 to 0:00, then the DVD Recorder &

Note VCR stops recording.

1.Check the antenna cable is connected.

2.Check the remaining time of the disc.

3.Check the date and time are correct.

Make sure the Clock (Setup-Clock Set) must be set before you proceed with a timer recording.

(See page 24)

1	Press the OPEN/CLOSE		button, and place a
	recordable disc on the disc tray.
2	Press the OPEN/CLOSE		button to close the disc
	tray.
	Wait until LOAD	disappears from the front panel
	display.
	With the unit in Stop mode, press the MENU
3button.
4	Press the …† buttons to select Programme			, then
	press the OK	or √ button.

DVD-RAM(VR)			Programme
Disc Navigation	ShowView			√
Playlist	Standard Timer			√
Disc Manager	ShowView Extended		: Off	√
Copy
Programme
Setup
MOVE	OK	RETURN	EXIT

5	Press the …† buttons to select the Standard
	Timer , then press the OK or √ button twice.
	• The Timer Recording screen is displayed.

DVD-RAM(VR)

Scheduled Record List

No.

No. 01

01

DVD

√

02

DVD

To

PR

Day

Start

End

Speed

V/P

√

03

√

04

DVD

AUX

SAT01

11:00

13:00

SP

Off

√

05

Recordable Time 01:23 SP

√

06

√

MOVE

OK

RETURN

EXIT

Recording

English - 61