Removing and Replacing a Card Cage Assembly
Step 4 Select one of the cards in the lower card cage to remove. Grasp the two card ejector levers and simultaneously pivot both ejector levers ninety degrees inward (away from the sides of the card cage) to unseat the card from the backplane connector. (Refer to Figure 11.)
Figure 11 Removing Cards From the Lower Card Cage
Card ejector lever
GIGABIT ROUTE PROCESSOR | Q |
Lower card cage
Switch fabric card
Card ejector lever
ENABLEDFAIL |
| |
| 0 |
|
| 1 | CSC |
| 0 |
|
| 1 |
|
ALARM | 2 | SFC |
|
| |
H10474
Step 5 Touching only the metal card carrier, slide the card out of the slot and place it immediately on the antistatic mat.
Repeat Step 4 and Step 5 for the rest of the cards in the lower card cage.
Cisco 12012 Gigabit Switch Router Card Cage Assembly Replacement Instructions 19
