Chapter 5 Configuring the Bridge for the First Time

Assigning Basic Settings

Follow these steps to connect to the bridge locally:

Step 1 Make sure that the PC you intend to use is configured to obtain an IP address automatically, or manually assign it an IP address from 10.0.0.31 to 10.0.0.40. Connect your PC to the power injector using a Category 5 Ethernet cable. You can use either a crossover cable or a straight-through cable.

Note When you connect your PC to the bridge’s power injector or reconnect your PC to the wired LAN, you might need to release and renew the IP address on the PC. On most PCs, you can perform a release and renew by rebooting your PC or by entering ipconfig /release and ipconfig /renew commands in a command prompt window. Consult your PC operating instructions for detailed instructions.

Step 2 Power up the power injector.

Step 3 Follow the steps in the “Assigning Basic Settings” section on page 5-4. If you make a mistake and need to start over, follow the steps in the “Resetting the Bridge to Default Settings” section on page 5-2.

Step 4 After configuring the bridge, remove the Ethernet cable from your PC and connect the power injector to your wired LAN.

Assigning Basic Settings

After you determine or assign the bridge’s IP address, you can browse to the bridge’s Express Setup page and perform an initial configuration. Follow these steps:

Step 1 Open your Internet browser. You must use Microsoft Internet Explorer (version 5.x or later) or Netscape Navigator (version 4.x).

Step 2 Enter the bridge’s IP address in the browser address line and press Enter. An Enter Network Password screen appears.

Step 3 Press Tab to bypass the Username field and advance to the Password field.

Step 4 Enter the case-sensitive password Cisco and press Enter. The Summary Status page appears. Figure 5-1shows the Summary Status page.

Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide. OL-4072-03

5-4

OL-4072-04

 

 

Page 50
Image 50
Cisco Systems 1400 manual Assigning Basic Settings

1400 specifications

Cisco Systems 1400, known for its robust networking solutions, is a versatile and powerful device designed to enhance connectivity in various environments. The Cisco 1400 is part of the Cisco Industrial Router series and is tailored specifically for industrial applications, particularly in challenging environments where durability and reliability are paramount.

One of the main features of the Cisco 1400 is its rugged construction. It is built to withstand extreme temperatures, vibrations, and dust, making it ideal for deployment in factories, oil and gas rigs, and outdoor installations. This ruggedness ensures operational continuity in situations where standard networking equipment might fail.

Connectivity is another primary characteristic of the Cisco 1400. It supports a variety of WAN and LAN interfaces, including Serial, Ethernet, and cellular connections. This multifunctionality allows for flexible network design, enabling organizations to integrate the device into existing infrastructure seamlessly. Furthermore, it facilitates remote access, making it suitable for managing distributed networks in real-time.

The Cisco 1400 integrates advanced security features to safeguard data and network integrity. With support for VPN, firewall, and intrusion prevention systems, it provides a secure platform for critical communications. The device is also compliant with various industry standards and regulatory requirements, ensuring that organizations can maintain robust security postures in line with compliance mandates.

Another notable technology featured in the Cisco 1400 is its support for Cisco’s IoT capabilities. It can connect and manage numerous IoT devices, providing enhanced monitoring and data collection critical for industrial applications. This feature supports the concept of Industry 4.0, allowing businesses to leverage data analytics for predictive maintenance and operational efficiency.

Management and configuration of the Cisco 1400 are simplified through the use of Cisco Prime Infrastructure and Cisco DNA Center. These management tools provide intuitive dashboards and automated processes, streamlining network operations.

In summary, the Cisco Systems 1400 is a powerful, rugged networking solution designed for industrial applications. With its versatile connectivity options, robust security features, support for IoT technologies, and simplified management capabilities, it stands out as an exceptional choice for organizations looking to enhance their network infrastructure in challenging environments. This makes the Cisco 1400 an ideal solution for modern industrial connectivity needs.