Chapter 3 Configuring the Cisco 1604 Router
Verifying DDR Configuration
Step 2 Enter the show dialer command. The following example shows that the Cisco 1604 has not placed any calls yet, and there have been no failures. An ISDN interface is a dialer interface. Key statistics are shown for each B channel:
BRI0 - dialer type = ISDN
| Dial String | Successes | Failures | Last called | Last status | |
| 14085551234 |
| 0 | 0 | never | - |
| 0 incoming call(s) have been screened. |
|
| |||
| 0 incoming call(s) rejected | for callback. |
|
| ||
| BRI0:1 - dialer type | = ISDN |
|
|
| |
| Idle timer (120 secs), Fast | idle timer (20 secs) |
| |||
| Wait for carrier (30 | secs), |
| |||
| Dialer state is idle |
|
|
|
| |
| BRI0:2 - dialer type | = ISDN |
|
|
| |
| Idle timer (120 secs), Fast | idle timer (20 secs) |
| |||
| Wait for carrier (30 | secs), |
| |||
| Dialer state is idle |
|
|
|
| |
Step 3 | Enter the show dialer map command to see the static dialer map that was built to the Cisco AS5300. | |||||
| This map is built by using the phone number and WAN IP address of the access server: | |||||
|
|
|
| |||
| Static dialer map ip | 10.1.254.1 name | ||||
Step 4 | Enter the show running command to see the Cisco 1604’s current configuration: | |||||
|
|
|
| |||
| Building configuration... |
|
|
|
Current configuration:
!
version 12.0
service timestamps debug uptime service timestamps log uptime service
!
hostname
!
aaa
aaa authentication login default local
aaaauthentication ppp default
!
username
!
interface Ethernet0
ip address 10.1.4.1 255.255.255.0
!
interface Serial0 no ip address shutdown
!
interface BRI0
ip address 10.1.254.4 255.255.255.0 encapsulation ppp
dialer map ip 10.1.254.1 name
Cisco IOS Dial Services Quick Configuration Guide