4-12
Cisco Nexus 2000 Series Hardware Installation Guide
Chapter4 Installing a Cisco Nexus Fabric Extender
Grounding the System
Figure4-2 Cisco Nexus 2300 Series FEX Ground Lug Location
In addition, follow these guidelines when handling these devices:
•Handle carriers by available handles or edges only; avoid touching the printed circuit boards or
connectors.
•Place a removed component board-side-up on an antistatic surface or in a static-shielding container.
If you plan to return the component to the factory, immediately place it in a static-shielding
container.
•Never attempt to remove the printed circuit board from the metal carrier.
Caution For safety, periodically check the resistance value of the antistatic strap. The measurement should be
between 1 and 10 megohm (Mohm).
1ESD ground strap 4Clip installed (behind screw)
2Clip and grounding lug 5Ground Lug
3Side view of grounding lug (clip slid behind
screw)