2-10
Cisco Nexus 2000 Series Hardware Installation Guide
Chapter2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
Cisco Nexus 2248TP-E FEX
Figure 2-10 shows the SFP+ optical transceiver used for uplink connections.
Figure2-10 SFP+ Optical Transceivers and FETs
Figure 2-11 identifies the major features of the SFP+ copper transceiver and cable used for uplink
connections.
SFP -H10GB-ACU7M Copper X – 10 Gbps Twinax, active transceiver (23.0 feet [7 meters])
SFP -H10GB-ACU10M Copper X – 10 Gbps Twinax, active transceiver (32.8 feet [10 meters])
RJ-45 Copper – X 100/1000 Mbps Connector
Table2-2 Supported Transceivers and Connector for the Cisco Nexus 2248TP-E FEX Uplink Interfaces
Transceiver or
Connector
Cable
Type
Fabric
Interface
(Uplink)
Host
Interface
(Downlink) Comments
197285
12
54
3
1Receive optical bore 4Clasp shown in open position
2Transmit optical bore 5Dust plug (use this to protect the bores from dust
contamination when the optical cables are removed)
3Clasp shown in closed position