2-20
Cisco Nexus 2000 Series Hardware Installation Guide
Chapter2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch
Cisco Nexus 2232TM FEX
Figure2-20 Port-Side Intake Airflow Fan Tray for the Cisco Nexus 2232PP and 2232TM FEXs
For more information on this fan tray, see the fan tray specifications in AppendixB, “Technical
Specifications”. For LED descriptions, see AppendixE, “LEDs”.
Transceivers and Connectors Supported by the Cisco Nexus 2232TM FEX
The Cisco Nexus 2232TM FEX supports SFP+ Ethernet optical and copper transceivers and optical FEX
Transceivers (FETs) for up to eight fabric uplink connections to the following Cisco Nexus 7000 Series
switch I/O modules:
•F2 Series 48-port 10-Gigabit I/O module (N7K-F248XP-25)
•M1 Series 32-port, 10-Gigabit Ethernet I/O module (N7K-M132XP-12)
•M1 Series 32-port, 10-Gigabit Ethernet I/O module with XL option (N7K-M132XP-12L)
•M2 Series 24-port 10-Gigabit I/O module (N7K-M224XP-23L)
You must use the same transceivers on both ends of the same uplink cable.
239936
2
1
3
1
1Captive screws (2) 3Port-side intake airflow indicated by
a black stripe on the front.
2Handle used for removing and installing the module 4Status LED