Cisco Systems 301, 303 manual Phone Feature Description

Getting Started	1
Getting to Know the Cisco SPA 301

#	Phone Feature	Description
2	Message	The LED color and action indicates the phone or
	Waiting/Status	message status:
	Indicator	• Red (solid)—You have a new voice mail
		message.
		• Red (fast blinking)—You have an incoming call.
		• Red (slow blinking)—You have a call on hold.
		• Red (series of two fast blinks)—Your phone has
		temporarily lost its Ethernet connection.
		• Orange (solid)—Your phone is not registered to
		the call control system. This occurs when the
		phone is rebooting and has not yet registered.
		• Orange (fast blinking)—Your phone’s firmware is
		upgrading.
		• Orange (slow blinking)—Your phone is
		downloading firmware.
		• Orange (series of two fast blinks)—Your phone
		has permanently lost its Ethernet connection.
		When the phone is reconnected, it will reboot.
		• Green (slow blinking)—Call forwarding or Do
		Not Disturb is turned on. (You will also hear an
		interrupted dial tone.)
3	Ringer button	Push to the On position to turn the ringer on. Push to
		the Off position to turn the ringer off.
4	Voice mail button	Press to access voice mail (must be set up by your
		phone system administrator).
5	Flash button	Press to place a call on hold and open another line.
6	Redial button	Press to redial the last number called.
7	Volume button	Press repeatedly to increase the volume of the
		handset (when the handset is off the phone) or ringer
		volume (when the handset is on the phone).
8	Keypad	Use to dial phone numbers.

Cisco Small Business IP Phone SPA 30X User Guide (SIP) 10