Front Panel LED Status Indicator Functions
Special Conditions
The following table describes the appearance of the cable modem front panel LED status indicators during special conditions to show that you have been denied network access.
Front Panel LED Status Indicators During Special Conditions
Front Panel Indicator | Network Access Denied | |
1 | POWER | On |
2 | DS | Blinking |
|
| 2 times per second |
3 | US | Blinking |
|
| 2 times per second |
4 | ONLINE | Blinking |
|
| 2 times per second |
5 | LINK | ON - When a single device is connected to either the Ethernet or USB |
|
| port and no data is being sent to or from the modem |
|
| BLINKS - When only one Ethernet or USB device is connected and data |
|
| is being transferred between the consumer premise equipment (CPE) |
|
| and the cable modem |
|
| OFF - When no devices are connected to either the Ethernet or USB ports |
|
| Notes: |
|
| When both Ethernet and USB devices are connected to the modem at |
|
| the same time, and data is being transferred through only one of the |
|
| devices (Ethernet or USB), the LINK LED status indicator illuminates |
|
| continuously. |
|
| Whenever data is being sent through both data ports (Ethernet and |
|
| USB) simultaneously, the indicator blinks as described above |
34 | 4030802 Rev A |
