Back Panel Description
Back Panel Description
The following illustration describes the back panel components of the DPC3010 and EPC3010 DOCSIS 3.0 cable modems.
1POWER—Connects the cable modem to the 12 VDC output of the AC power adapter that is provided with your cable modem. Only use the AC power adapter and power cord that is provided with your cable modem
2ETHERNET—Bridged RJ-45 Gigabit Ethernet port connects to the Ethernet port on your PC. This port also supports 10/100BASE-T connections
3USB—USB 2.0 port connects to the USB port on your PC
Note: The optional USB port may not be present on all modems.
4RESET—Reset-to-Default Momentary Switch (Factory Reset)
Note: This button is for maintenance purposes only. Do not use unless told to do so by your service provider.
5MAC Address Label—Displays the MAC address of the cable modem
6CABLE—F-Connector connects to an active cable signal from your service provider
CAUTION:
Avoid damage to your equipment. Only use the AC power adapter and power cord that is provided with your cable modem.
