11
•If you will connect your DMP to an analog display,
do all of the following:
–
Plug the yellow jack on the RCA cable into the
CVBS interface on your DMP.
–
Plug the red jack on the RCA cable into the
AUDIO/RIGHT interface on your DMP.
–
Plug the white jack into the AUDIO/LEFT
interface on your DMP.
Step2 Connect the other end of the cable (or cables) to the
corresponding interface (or interfaces) on your
DMP display.
Step3 If the DMP display is not already turned on, turn it
on now.
5 Connecting to an AC Socket
Warning
Use only the supplied power adapter and plugs.