Cisco Systems 6000 exactly as you enter them in the NAM. This example shows how to configure the NAM:

30
Catalyst6000 Family Network Analysis Module Installation and Configuration Note
78-10406-05
Configuring the NAM
After completing this configuration, you can use the NAM with a network monitoring application such
as TrafficDirector, NetScout nGenius Real-Time Monitor, or any other IETF-compliant RMON
application.
Note If you are using TrafficDirector, you must enter the community strings in TrafficDirector
exactly as you enter them in the NAM.
This example shows how to configure the NAM:
Console> (enable) session 2
Trying NAM-2...
Connected to NAM-2.
Escape character is '^]'.
Network Analysis Module (WS-X6380-NAM)
login: root
Password:
Network Analysis Module (WS-X6380-NAM) Console, 2.1(1a)
Copyright (C) 1999, 2000, 2001 Cisco Systems, Inc.
WARNING! Default password has not been changed!
root@localhost# ip address 172.20.52.29 255.255.255.224
root@localhost# ip broadcast 172.20.52.31
root@localhost# ip host nam1
root@localhost# ip gateway 172.69.2.132
root@localhost# ip domain cisco.com
root@localhost# ip nameserver 171.62.2.132
root@localhost# show ip
IP address: 172.20.52.29
Subnet mask: 255.255.255.224
IP Broadcast: 172.20.52.31
DNS Name: nam1.cisco.com
Default Gateway: 172.20.52.1
Nameserver(s): 171.69.2.132
root@localhost#
root@localhost# snmp location “Cisco Lab, Building X, Floor 1”
root@localhost# snmp contact “Jane Doe, Cisco Systems, (408) 111-1111”
root@localhost# snmp name “6k-NAM - Slot 2”
root@localhost# snmp community public ro
root@localhost# snmp community private rw
root@localhost# show snmp
SNMP Agent: nam1.cisco.com 172.20.52.29
SNMPv1: Enabled
SNMPv2C: Enabled
SNMPv3: Disabled
community public read
community private write