6
Figure 3 Inserting a SFP GBIC Module into a SFP GBIC Port
Step 1 Turn the SFP GBIC module so the latch is on the bottom. The SFP GBIC module is keyed to be inserted correctly.
Step 2 Insert the SFP GBIC module into SFP port 0/0, 0/1, or 0/2. Repeat Step 2 if you are inserting a second or third SFP GBIC
module.
Step 3 Do not remove the SFP GBIC module plugs until you are ready to install the cables.
4 Rack-Mount the Router
This section provides information for rack-mounting the router.

Attach the Rack-Mount Brackets—Chassis Front-Mounted

Figure 4 Attaching the Rack-Mount Brackets to the Front of the Chassis
1SFP GBIC port 2Latch beneath plug
1Rack-mount bracket 24 screws, 8-18 x .37 in., for use with a 19-inch rack
4 screws, 8 x .375 in., for use in a 21–23-inch rack
RJ45 EN LINK
TX RX
GBIC
GIGABIT ETHERNET 0/2
ETHERNET 0/0
LINK
TX RX
GBIC
RJ45 EN LINK
TX RX
GBIC
GIGABIT ETHERNET 0/1
SERIES
CONSOLE
AUX
COMPAC
FLASH
80269
2
TX RX
TX RX
GBIC
1
12
ALARM
RJ45 EN LINK
TX RX
GBIC
GIGABIT ETHERNET 0/2
RJ45 EN LINK
TX RX
GBIC
GIGABIT ETHERNET 0/0
RJ45 EN LINK
TX RX
GBIC
GIGABIT ETHERNET 0/1
CISCO 7301
SLOT 1
CONSOLE
AUX
COMPACT
FLASH STATUS
100-240V, 2A, 50/60 Hz
24V
=
9A, 48 - 60V
=
5A
ENABLED
RX CELLS
RX CARRIER
RX ALARM
ATM
80906
BA