Cisco Systems 7301 1 , 2

1 Documentation and Resources

Documentation for the Cisco 7301 router is online and orderable. For detailed hardware installation instructions, refer to the

online Cisco 7301 Installation and Configuration Guide. Refer to the following online documents for titles and links to related

documentation for installation and replacement of parts (including port adapters), regulatory compliance information, and

troubleshooting information and tools.

•All Cisco 7301 documentation—See the Cisco 7301 Internet Router Documentation Roadmap at

http://www.cisco.com/univercd/cc/td/doc/product/core/7301/4878.htm

•Port adapter documentation—See the Cisco 7301 Router Port Adapter Documentation Roadmap at

http://www.cisco.com/univercd/cc/td/doc/product/core/7301/4879.htm

•Troubleshooting documentation and tools—See the Cisco 7301 Internet Router Troubleshooting Documentation Roadmap

at http://www.cisco.com/univercd/cc/td/doc/product/core/7301/4951.htm

Is Cisco documentation helpful? Click here or go to

http://forums.cisco.com/eforum/servlet/viewsflash?cmd=showform&pollid=rtgdoc01!rtgdoc to give us your feedback

For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and

also recommended aliases and general Cisco documents, see the monthly What’s New in Cisco Product Documentation, which

also lists all new and revised technical documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.

The Document Revision History table below records technical changes to this document begininng beginning with version

OL-5341-03.

2 Prepare for Installation

This section contains information about tools and parts, warnings, site preparation information, and information for

workbench or tabletop installation and rack-mount installation.

Warning

Only trained and qualified personnel should install, replace, or service this equipment.

Statement 1030

Warning

Read the installation instructions before you connect the system to its power source.

Statement 1004

Warning

This unit is intended for installation in restricted access areas. A restricted access area is where access can only

be gained by service personnel through the use of a special tool, lock and key, or other means of security, and is

controlled by the authority responsible for the location.

Statement 37

OL-5341-03 August, 2005 This is the third version of this document.