Chapter 2 Installation
Installing Your Router
Connecting the G.SHDSL Line
The procedure for connecting the G.SHDSL line depends on the router and, in some cases, on your location. This section describes how to connect the G.SHDSL line to a cable wall jack.
Warning To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity.
Figure 2-3 Connecting an G.SHDSL Line to a Wall Jack
Cisco 828 router
TO HUB TO PC
ETHERNET 10 | BASE T |
|
4 | 3 |
|
|
| 2 |
| |
|
| 1 | |
|
|
|
Model |
|
Cisco | |
CONSOLE | 828 |
| |
G.SHDSL
+5 VDC
56637
1.Connect lavender cable to G.SHDSL port.
2. Connect other end of cable to wall jack.
|
| Cisco 828 Router and SOHO 78 Router Hardware Installation Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|
