Cisco Systems 828, 78 manual Connecting the Power Supply

Chapter 2 Installation

Installing Your Router

Warning The device is designed to work with TN power systems.

Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 16A international) is used on the phase conductors (all current-carrying conductors).

Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use.

Figure 2-5 Connecting the Power Supply

1. Press power switch to standby ().

Cisco 828 router

TO HUB		ETHERNET 10	BASE T	Model
TO PC					Cisco
				CONSOLE		828
	4	3
			2
				1

2. Connect power supply cable.

G.SHDSL

+5 VDC

56639

5. Press power switch to on (

).

Desktop power supply

4. Connect other end

of power cord to

3. Connect power cordelectrical outlet. to power supply.

	Cisco 828 Router and SOHO 78 Router Hardware Installation Guide
78-12837-02		2-11