Prestige 971M Quick Start Guide
4
1.2 Front Panel
Look at the front panel LEDs. The SYS LED blinks while performing system testing. The SYS LED then turns
steady on if the testing was successful. The CABLE LED blinks and turns steady on if the RF-Connector port
is properly connected. The LAN LED turns on if the (corresponding) LAN port is properly connected.
Table 1 Front Panel LEDs
LED COLOR STATUS DESCRIPTION
PWR Green On The power is on.
Off The power is off.
SYS Green On The Prestige is receiving power and functioning properly.
Blinking The Prestige is rebooting.
None Off The system is not ready or has malfunctioned.
LAN Green On The LAN Ethernet Port has a successful link.
Blinking The LAN Port is Sending or Receiving Ethernet data.
None Off The LAN Ethernet Port is not ready or cannot achieve a link.
USB Green On The USB-Computer Link is successful.
Blinking The P-971M is Sending or Receiving USB data.
None Off The USB-Computer Link is not ready or unsuccessful.
DATA Green Blinking The Cable Interface (WAN Port), is Transmitting/Receiving.
None Off The WAN connection is idle.