4

57013

1 3

1

2

2

Ground lead service loop

3

Cable tie

DC power leads

4

Power switch

 

 

 

1.At the rear of the router, check that the power switch is in the off (O) position.

2.Ensure that the –V and +V leads are disconnected from the power source.

3.Using a wire stripper, strip approximately 0.55 inch (14 mm) from the –V, +V, and ground leads (2).

4.Insert the stripped end of the ground lead (1) all the way into the ground lead receptacle on the DC-input power supply, and tighten the receptacle screw using a 3/16-inch flat-blade screwdriver.

5.Insert the stripped end of the +V lead all the way into the +V lead receptacle and tighten the receptacle screw using the same 3/16-inch flat-blade screwdriver. Repeat this step for the –V lead.

Note Make sure the entire stripped end of each lead is inserted all the way into its receptacle. If any exposed wire at the stripped end of a lead is visible after inserting the lead into its receptacle, remove the lead from the receptacle, use the wire stripper to cut the stripped end of the lead, and repeat Step 3. through Step 5.

6.After tightening the receptacle screw for the ground, +V, and –V DC-input leads, use a cable tie (3) to secure the three leads to the power supply faceplate.

Note When securing the ground, +V, and –V DC-input leads to the power supply faceplate, leave a small service loop in the ground lead to ensure that the ground lead is the last lead to disconnect from the power supply if a great deal of strain is placed on all three leads.

7.Connect the ground, +V, and –V leads to the power source.

15

Page 15
Image 15
Cisco Systems CISCO7206 quick start 57013

CISCO7206 specifications

The Cisco 7206 is a versatile and powerful router designed to meet the demands of enterprise networking environments. A member of Cisco's 7200 series, this router is ideal for a range of applications including enterprise edge routing, service provider aggregation, and large branch office connectivity. As network infrastructures continue to grow in complexity, the Cisco 7206 stands out with its robust features, advanced technologies, and reliable performance.

One of the key characteristics of the Cisco 7206 is its modular architecture. This allows for various interface cards to be installed, enabling customization to meet specific networking requirements. The router supports multiple WAN technologies, including T1, E1, and various DSL connections, facilitating versatility and accommodating different connectivity needs. The modularity also extends to its processors and memory, allowing businesses to scale their networking capabilities as they grow.

The Cisco 7206 employs Cisco's proprietary IOS software, providing a wealth of networking features including advanced routing protocols, such as BGP, OSPF, and EIGRP. This ensures robust and reliable data transmission across diverse environments. Quality of Service (QoS) features are also integrated into the router, allowing for traffic prioritization and management of bandwidth, which is especially critical for applications requiring low latency, such as VoIP or video conferencing.

Additionally, security features integrated into the Cisco 7206, including IPsec for VPNs, access control lists (ACLs), and advanced encryption methods, assure that data is transmitted securely across the network. The router also supports Network Address Translation (NAT) and firewall capabilities, offering an extra layer of protection against unauthorized access.

In terms of performance, the Cisco 7206 is equipped with high-speed interfaces and a powerful CPU, enabling it to handle substantial amounts of data traffic efficiently. With support for both IPv4 and IPv6, it indeed meets the needs of modern networks while future-proofing enterprise infrastructures as they transition to newer protocols.

Overall, the Cisco 7206 router combines flexibility, high performance, and advanced features, making it a powerful solution for organizations needing reliable and adaptable networking solutions. With its modular design and extensive compatibility, it provides an effective way for businesses to manage their communications and data traffic.