Caution Do not mix power supplies in Cisco 7206 routers. In dual power supply configurations, both power supplies must be of the same type (two
Caution To ensure adequate airflow across the router power supplies, a power supply or a power supply filler plate must be installed in each power supply bay. The illustration on page 29 shows a Cisco 7206 with an installed power supply filler plate.
Replace the Power Supply
1.Power down the router.
2.Disconnect the router from the power source (3).
3.Unscrew the captive installation screws (4).
4.Grasp the handle (5) and pull the power supply out of the chassis.
5.Insert a new power supply of the same type that you removed and tighten the captive installation screws.
6.Connect the power supply to the power source and power up the router. Also see the power supply documentation URLs listed on page 32.
28