Cisco 10000 ESR

AC Power Entry Module Installation

This publication contains instructions for installing the AC Power Entry Module (PEM) in the Cisco 10000 Edge Services Router (ESR). If you are not familiar with the Cisco 10000 router, see the Cisco 10000 ESR System Description, and the Cisco 10000 ESR Hardware Installation Guide for additional information.

Contents

The following sections are included in this configuration guide:

Product Description, page 2

Prerequisites and Preparation, page 3

Installation Guidelines, page 4

Adding or Replacing an AC PEM, page 5

FCC Class A Compliance, page 20

Cisco Connection Online, page 20

Documentation CD-ROM, page 22

Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Copyright © 2000. Cisco Systems, Inc. All rights reserved.

78-10832-01

Page 1
Image 1
Cisco Systems Cisco 10000 ESR manual Contents