Product Description

Product Description

The AC PEM provides power conversion directly from the facility VAC input power (100 VAC to 240 VAC) to the –48V VDC used internally by the system (see Figure 1). AC power is delivered to the AC PEM from the VAC connection power cable to the power cord attached to the PEM.

Figure 1

AC PEM

POWER FAULT

30004

There are two PEM bays in the chassis; however, you only need one PEM to power the router. You can install an additional PEM for power redundancy.

Cisco 10000 ESR AC Power Entry Module Installation

2

78-10832-01

 

 

Page 2
Image 2
Cisco Systems Cisco 10000 ESR manual Product Description