Chapter 2 Installation
Installing the Router
1 | Two | 5 | Maximum distance between the |
| screws |
| router and the power supply |
|
|
| (6 ft [1.8 m]) |
|
|
|
|
2 | Distance between the two | 6 | Horizontal surface for placing |
| screws (7 5/8 in. [19.35 cm]) |
| the power supply. |
|
|
|
|
3 | Cisco 837 router | 7 | Distance between the screw and |
|
|
| the wall (1/8 in. [0.32 cm]). |
|
|
|
|
4 | Mounting brackets |
|
|
|
|
|
|
Perform the following steps to mount the router on the wall:
Step 1 Secure two screws 7 5/8 inches (19.35 cm) apart into a wall and 1/8 inch (0.32 cm) from the wall.
Step 2 Hang the router on the screws as shown in Figure
Step 3 Place the power supply on a horizontal surface.
Installing the Router
To install the router, you need to perform the following tasks in the following order:
1.Connect the Ethernet devices to the router.
2.Connect the ADSL line.
3.Connect a terminal or PC to the router for software configuration using the
4.Connect the router to the power source.
5.Verify the links, using the router LEDs.
| Cisco 837 Router and SOHO 97 Router Hardware Installation Guide |
