Installation |
When fitting the DA 3590 in a 900 mm wide housing unit, the retaining brackets supplied are used to align the cooker hood and provide additional support.
The retaining brackets are secured either to the top or the back panel of the wall unit.
If the wall unit does not have a solid back panel, the cooker hood can be secured directly to the wall using the screws and plugs supplied.
The top housing screws are used to secure the retaining brackets to the cooker hood.
If the screws are difficult to access use the angled key supplied to tighten them.
Unscrew the appropriate housing screws.
Attach the retaining brackets loosely to the housing with the screws.
Align the cooker hood and mark the position of the fixing holes in the wall unit.
Now secure the brackets to the wall unit.
Realign the cooker hood and tighten up the screws on the housing unit.
Use the adhesive covers supplied to conceal the fixing holes which are not required.
33
