Installation
Adjusting the deflector plate
(DA 3560, DA 3590)
When retracted, the deflector plate is held in place by magnets.
The retaining force of the magnets can be adjusted.
The magnets should be adjusted so that the deflector plate is held in place securely on the left and right hand side and can be lowered slightly.
An angled key is supplied for adjusting the magnets.
Adjust both sides equally.
Turn in stages by half a turn each time and check the adjustment by lowering and raising the deflector plate.
–Turning the adjusting screws clockwise increases the magnetic retaining force.
–Turning the adjusting screws
The covers for the brackets are designed for 16 mm and 19 mm thick carcase sides. Turn the covers so that they are in the appropriate position and fit them onto the brackets.
34