Cleaning and care
Before any cleaning or maintenance work is carried out, disconnect the cooker hood from the mains supply.
Exercise caution when changing halogen lamps. They get very hot during use and remain hot for some time after being switched off. The hot lamps are also susceptible to damage from damp cleaning. Wait a few minutes after switching off before commencing cleaning.
Housing
General
The surfaces and controls are susceptible to scratches and abrasion. Please observe the following cleaning instructions.
All external surfaces and controls can be cleaned using warm water with a little washing up liquid applied with a soft sponge.
Wipe the surfaces dry using a soft cloth.
Do not use too much water when cleaning the controls. Water could penetrate into the electronics and cause damage.
Avoid:
–cleaning agents containing soda, acids, chlorides or solvents,
–abrasive cleaning agents, e.g. powder cleaners or cream cleaners and abrasive sponges, as well as pot scourers or sponges which have been used previously with abrasive cleaning agents. These will damage the surface material.
Important for appliances with stainless steel housing
(This infomation does not apply to the controls).
Stainless steel surfaces can be cleaned using Miele's
To help prevent
18