Installation
1 exhaust socket
for exhaust ducting 150 mm.
1 reducing collar
for exhaust ducting 125 mm.
1 non-return valve
for fitting into the exhaust socket (not for recirculation mode).
2 covers
for the brackets
2 brackets
to support the appliance in the wall unit.
2 retaining brackets
for additional aligning and securing of the cooker hood in a 900 mm wide unit (DA 3590 only) .
1 cover
for the charcoal filter slots.
1 spacer strip
to conceal the gap between the rear of the appliance and the wall.
Conversion kit for recirculation mode
(this is not supplied, but is available as an optional accessory - see "Technical data").
The kit contains an exhaust grille and flexible aluminium hose with clips.
12 screws 4 x 15 mm
for securing the cooker hood into the wall unit.
4 screws M4 x 16 mm
for securing the cooker hood to the brackets and for securing the spacer strip.
4 screws M4 x 8 mm
for securing the spacer strip.
2 screws 4 x 40 mm,
2 plugs 6 x 36 mm
for additional securing of the cooker hood to the wall (only when fitting the DA 3590 into a 900 mm wide unit).
4 screws 4 x 25 mm
for additionally securing the DA 3590 into a 600 mm wide unit.
4 adhesive covers
to conceal the fixing holes which are not required (DA 3590 only).
1 x T 20 angled key
27
