Manuals / Miele / Kitchen Appliance / Cooktop

Miele DA 3590 EXT, DA 3560 EXT installation instructions Electrical connection, Installation

Models: DA 3560 EXT DA 3560 DA 3590 EXT DA 3590

1 44

Download 44 pages 12.77 Kb

Page 37

Electrical connection

Installation

Fit the conversion kit as described in the installation instructions supplied with the kit.

Make sure that the slats in the exhaust grille point towards the centre of the room and not towards a wall or the ceiling.

A non-return flap is not used in recirculation mode.

Fit the charcoal filters (see "Cleaning and care").

Electrical connection

Refer to the notes in "Electrical connection" and "Warning and Safety instructions" before connecting to the electricity supply.

For appliances connected to an external motor (EXT models): Connect the cooker hood to the external motor using the connecting cable and the 6-pole plug connector.

Connect the appliance to the electricity supply.

37

Image 37

Miele DA 3590 EXT, DA 3560 EXT installation instructions Electrical connection, Installation

Contents

Cooker hood DA DA DA 3560 EXT DA 3590 EXT Operating and installation instructionsen - GB Contents Disposal of the packing material Caring for the environmentDisposal of your old appliance Safety with children Warning and Safety instructionsCorrect application Warning and Safety instructions Technical safetyWarning - danger of toxic fumes Warning and Safety instructionsIn order to ensure safe operation, and to prevent gases given off by the heating appliances from being drawn back into the room when the cooker hood and the heater are in operation simultaneously, an underpressure of Warning and Safety instructionsCorrect use Correct installationWarning and Safety instructions Warning and Safety instructions AccessoriesGuide to the appliance Pull-outdeflector plate Controls Grease filters Buttons for selecting the fan power levelHob lighting Exhaust socket 150 mm Slots for the charcoal filtersair extraction Description of the functionsair recirculation an external motorConctivity MielehomeTo select a power level To switch the fan onIntensive setting Automatic switch-offof the Intensive settingTo switch the hob lighting on To switch the fan offTo switch the hob lighting off Run-onoptionFilter operating hours counter Safety switch-offOperation Operation Checking the filter operating hours counterHousing Cleaning and careGeneral Controls Grease filtersCleaning and care Cleaning the grease filters in the dishwasher Cleaning the grease filters by handCleaning and care Cleaning and care Fitting and replacing the charcoal filtersCleaning and care Changing a halogen lampGuarantee After Sales ServiceAppliance dimensions Appliance dimensions Safety distance between hob and cooker hood SInstallation accessories Installation1 reducing collar 1 exhaust socket1 non-returnvalve 2 coversEXT models Repositioning the venting connectionInstallation Installation Installation The brackets are designed for InstallationTighten the four securing screws from below InstallationUnscrew the appropriate housing screws InstallationInstallation Adjusting the deflector plateInstallation Exhaust connectionInstallation Setting up for recirculation modedai2699 Installation Electrical connectionConnection for air extraction Connection for air extraction Condensate trapwith air extraction Silencerin recirculation mode air extraction with external motorTHIS APPLIANCE MUST BE EARTHED Electrical connectionInstallation Connection to a push button switchOperation with Control module DSM Potential free connectionSpecial accessories for recirculation mode Technical dataFan performance Conversion kit DUU 150 or DUUM.-Nr.09 Alteration rights reserved