![Setting up for recirculation mode](/images/new-backgrounds/65750/6575071x1.webp)
Installation
Setting up for recirculation mode
If site conditions are not suitable for the cooker hood to be used with air extraction, the appliance must be set up for recirculation.
A conversion kit, available through your dealer or from Miele is required for operating the cooker hood in recirculation mode.
You will also need two charcoal filters (see "Technical data").
dai2699
Attach the vent ducting to the exhaust socket, using e.g. a flexible hose and clips (available as an optional accessory).
When using 125 mm ducting, fit the reducing collar supplied into the exhaust socket. (See "Connection for air extraction").
Place the vent ducting onto the exhaust socket on the cooker hood.
See "Connection for air extraction" for further instructions on fitting the ducting.
Conversion kit DUU 150 with a plastic grille is suitable for fitting in a
Conversion kit DUU 151 with a stainless steel grille is recommended if the grille is to be fitted in an area which is visible.
36