Cisco Systems Cisco AS5400XM MII (China) EMC Class A Notices and Warnings

Regulatory Compliance and Safety Information for the CiscoAS5400 and Cisco AS5400XM Universal Gateways

OL-10264-01

MII (China)

MII (China)EMC Class A Notices and Warnings

This section includes the EMC Class A warnings for the CiscoAS5400XM universal gateway.

Note See the Agency Approvals section for the EMC class for specific models and parts.

Modifying the equipment without Cisco’s authorization may result in the equipment no longer

complying with FCC requirements for Class A digital devices. In that event, your right to use the

equipment may be limited by FCC regulations, and you may be required to correct any interference to

radio or television communications at your own expense.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case users will be

required to correct the interference at their own expense.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.