Cisco Systems Cisco ONS 15454 SDH manual NTP-D30 Create Users and Assign Security

Chapter 4 Turn Up Node

NTP-D30 Create Users and Assign Security

NTP-D30 Create Users and Assign Security

Purpose	This procedure creates ONS 15454 SDH users and assigns their security
	levels.
Tools/Equipment	None
Prerequisite Procedures	NTP-D24 Verify Card Installation, page 4-2
Required/As Needed	As needed
Onsite/Remote	Onsite or remote
Security Level	Superuser only

Step 1	Complete the “DLP-D60 Log into CTC” task on page 3-24at the node where you want to create users.
	If you are already logged in, continue with Step 2.
	Note You must log in as a Superuser to create additional users. The CISCO15 user provided with each
		ONS 15454 SDH can be used to set up other ONS 15454 SDH users. You can add up to 500 users
		to one ONS 15454 SDH.
Step 2	Complete the “DLP-D74 Create a New User—Single Node” task on page 4-4or the “DLP-D75 Create
	a New User—Multiple Nodes” task on page 4-5as needed.
	Note You must add the same user name and password to each node a user will access.
Step 3	If you want to modify the security policy settings, complete the “NTP-D205 Modify Users and Change
	Security” procedure on page 12-25 .
	Stop. You have completed this procedure.

DLP-D74 Create a New User—Single Node

Purpose	This task creates a new user for one ONS 15454 SDH.
Tools/Equipment	None
Prerequisite Procedures	DLP-D60 Log into CTC, page 3-24
Required/As Needed	As needed.
Onsite/Remote	Onsite or remote
Security Level	Superuser only

Step 1 Click the Provisioning > Security > Users tabs.

Step 2 In the Security window, click Create.

Step 3 In the Create User dialog box, enter the following:

•Name—Type the user name. The name must be a minimum of six and a maximum of 20 alphanumeric (a-z, A-Z, 0-9) characters.

Cisco ONS 15454 SDH Procedure Guide, R4.6

4-4 January 2004