Chapter 3 Using the Cisco IP Phone 7910 Series
Making Telephone Calls
3-10
Getting Started with the Cisco IP Phone 7910 Series
78-11443-02

Establishing Meet-Me Conference Calls

A Meet-Me conference allows other callers to dial into the conference call. The
ability to make Meet-Me conference calls with your telephone is an optional
feature. Your phone does not support this feature by default. It requires a special
conference number, and it is only available if your system administrator
configured your phone to support it.
To establish a Meet-Me conference call:
Step 1 Press the Line button.
Step 2 Press the Meet-Me button.
Step 3 Dial the Meet-Me conference number.
Step 4 Follow the voice instructions to establish the Meet-Me conference.
You can also join Meet-Me conference calls established by other people. To join
a Meet-Me conference, dial the Meet-Me conference number provided by the
Meet-Me conference initiator. Do not press the Meet-Me button to simply join a
call. You are connected to the conference once the conference initiator has dialed
in and established the conference.
Using Call Pickup
Call pickup allows you to answer a call that comes in on a telephone extension
other than your own. When you hear an incoming call ringing on another phone,
you can redirect the call to your phone by using the call pickup feature.
There are two types of call pickup available on Cisco IP Phones:
• Call Pickup—For picking up incoming calls within your own group. The
appropriate call pickup group number is dialed automatically when you
choose this feature. See the “Picking Up Calls in Your Group” section on
page 3-11.
• Group Call Pickup—For picking up incoming calls within your own group or
in other groups. You must dial the appropriate call pickup group number
when using this feature. See the “Picking Up Calls Outside of Your Group”
section on page 3-11.